In a suspended ceiling, a cassette is usually the right answer. It throws air in four directions, it sits flush in the grid, and it needs no ductwork at all. The only real decision is which grid size.
60x60
The 60x60 format drops into a standard ceiling tile and covers the smaller duties: 2.5 kW, 3.6 kW, 5.0 kW and 6.0 kW.
Because it matches the tile module, it disappears into the ceiling grid rather than interrupting it. In a small office, a treatment room or a meeting room it is almost always the better-looking choice.
90x90
The 90x90 format carries the larger duties, from 3.6 to 5.0 kW up to 10.0 to 14.0 kW.
One 90x90 unit in an open-plan floor beats three 60x60 units for cost, commissioning time and the number of things that can fail.
Settle these before ordering
Void depth above the tile, which is tighter than people expect once the structure and services are in.
Whether the ceiling grid is actually 600 mm, because older buildings often are not. And the condensate route, since a cassette needs a fall or a pump, and the pump is the part that fails.
Air distribution
Four-way throw is even, which is the point, but it also means the unit should sit near the centre of the space it serves. A cassette pushed into a corner because that is where the void was free will blow cold air down one wall and leave the rest of the floor untouched.
Specifying
Send the ceiling plan and the void depth and we will pick the format and the duty. See our PACi NX overview or browse cassette air conditioning. Call 01283 380031 | sales@pureclima.co.uk.

