Skip to content

Free Ventilation estimate  01283 380031 

✌🏼 Next Day Delivery

Cart
DUCO

DucoFlex Insulated ISO Duct: Running MVHR Through Cold Spaces

Two of the four ducts leaving an MVHR unit carry air at outdoor temperature: the outdoor air (ODA) run coming in, and the exhaust air (EHA) run going out. Run those uninsulated through a cold loft and they sweat. Run them uninsulated through a warm house and you lose the efficiency you paid for.

The insulated ISO range

DucoFlex insulated duct comes in 1 m lengths with an integrated coupler, so a run assembles without a separate sleeve at every joint. Four diameters cover domestic work: D125, D160, D180 and D200.

Turning corners

Every tight corner costs airflow. The range includes 45 degree and 90 degree insulated bends with integrated couplers in the same four sizes. Two 45s instead of one 90 is usually worth the extra fitting where there is room.

Where a plain join is needed, insulated couplers keep the insulation continuous across the joint rather than leaving a cold bridge at every connection.

Connecting to the unit

At the unit end, an insulated connection piece with joint takes the spigot size down or across to the duct size without breaking the insulated envelope.

Where it goes wrong

Three recurring mistakes: insulation stopped short at the terminal, so the last 300 mm sweats; a cold bridge left at an uninsulated fitting; and ODA and EHA runs strapped together, which lets the exhaust warm the incoming air and skews commissioning readings.

Keep the two cold runs apart and insulated end to end. Where the run passes out through the roof or wall, finish it with a matching terminal from the roof and wall terminal range.

Specifying

Send the duct layout and we will take off the lengths, bends and couplers. Browse insulated ducting or call 01283 380031 | sales@pureclima.co.uk.

Previous Post Next Post

Leave A Comment