Skip to content

Free Ventilation estimate  01283 380031 

✌🏼 Next Day Delivery

Cart
DUCO

Which Duco MVHR Filter Do I Need? Filter Sets by DucoBox Model

Short answer: Duco filter sets are matched to a specific DucoBox unit, not to the range as a whole, so the first thing to find is your unit's model name — Energy Comfort, Energy Comfort Plus, Energy Sky D275 or Energy Premium. Once you know that, you only have two choices left: two coarse filters, or one coarse plus a fine ePM1 filter. The table below matches every filter set stocked at PureClima to the unit it fits.

Duco Coarse 65% and ePM1 55% replacement filter set for DucoBox Energy Premium MVHR units

Find your filter set

Your DucoBox unit 2 × Coarse 65% Coarse 65% + ePM1 55%
Energy Comfort (Plus) D250 Filter set Filter set
Energy Comfort / D325 Filter set Filter set
Energy Comfort D400 / Comfort Plus Filter set Filter set
Energy Sky D275 Filter set Filter set
Energy Premium Filter set Filter set

All ten sets sit in the MVHR filters and spare parts collection.

What the filter classes mean

Filter classes come from ISO 16890, the standard that replaced the old G and F grades for ventilation filters.

Coarse 65% is a general-purpose filter that captures larger particles — insects, leaf fragments, hair, coarse dust. It is the normal choice on the extract side, where the filter's job is to protect the fan and heat exchanger from debris pulled out of the house.

ePM1 55% removes at least 55% of particles up to one micrometre across. That size range covers a lot of what people actually want filtered out of incoming air: fine traffic particulates, smoke, and much airborne pollen. It is the supply-side filter to choose if you live near a busy road, in a city centre, or if anyone in the household has hay fever or asthma.

Which set should you buy?

  • 2 × Coarse 65% — a coarse filter on both the supply and extract sides. Lower cost, lower resistance to airflow. Reasonable in a rural or low-pollution location where incoming air is already clean.
  • Coarse 65% + ePM1 55% — coarse on extract, fine on supply. The better choice for urban and roadside homes and for allergy sufferers, at a slightly higher price and slightly higher pressure drop.

You can switch between the two from one service to the next — the housings are the same within a given unit. If you do move to ePM1 filtration, keep an eye on the unit's commissioned airflows, because a finer filter presents more resistance.

How often should filters be changed?

DUCO lists a typical replacement interval of every 6 to 12 months for these sets. Where your system falls in that range depends on how dusty the location is, whether there is building work nearby, pollen levels, and how hard the unit runs.

Signs it is time to change them earlier:

  • Airflow at the valves feels noticeably weaker than at commissioning
  • The unit is running at a higher fan speed to achieve the same flow, or has become louder
  • A visible grey loading across the filter face, rather than light surface dust
  • A musty smell at the supply valves

Vacuuming a loaded filter is a stopgap, not a service. The media is designed to be replaced, and a damaged or over-cleaned filter lets debris through to the heat exchanger, which is a far more expensive component.

Changing them

The sets are made to the exact dimensions of the matching DucoBox unit, so a correct set drops straight in. Typically: isolate the unit, open the filter covers, note the airflow direction marked on the old filters, remove them, and fit the new set the same way round. Reset the filter indicator or service timer if your unit and controller provide one, then confirm the unit returns to its normal operating speed. Always follow the installation manual for your specific model.

Before you order, confirm

  • The exact unit name and size from the label on the unit — D250, D275, D325, D400, Comfort Plus or Energy Premium
  • That you are ordering a set, not a single filter, if both sides are due
  • Which combination you want: two coarse filters, or coarse plus ePM1 55%
  • The SKU shown on the product page, if you are matching to a previous order

Frequently asked questions

My unit is a DucoBox Silent or Focus — which filter do I need?

These are extract-only MEV units rather than heat recovery units, so they do not take the MVHR filter sets listed above. Check the parts listed for your specific unit in the spare parts collection, or read DucoBox Silent & Focus MEV explained for how those systems are put together.

Can I fit an ePM1 filter to any DucoBox?

Only where DUCO lists one for that unit. Every unit in the table above has both options; do not assume a set from a different model will fit, even if the dimensions look close.

Will finer filters reduce my airflow?

A finer filter has a higher pressure drop, so the unit works slightly harder for the same flow. On a correctly commissioned system this is accommodated, but it is worth checking valve flows after the change if anyone in the house is sensitive to ventilation rates.

I do not know which DucoBox I have.

The model name is on the unit's rating label, usually on the front or side of the casing. Our guide to the DucoBox range describes each unit's size and duct arrangement, which is often enough to identify it from a photograph.

Next step

Match your unit in the table above and order the matching set from the MVHR filters and spare parts collection. If you are not certain which unit you have, send us a photograph of the rating label through the contact form and we will confirm the right filter set before you order.

Previous Post Next Post

Leave A Comment