Skip to content

Free Ventilation estimate  01283 380031 

✌🏼 Next Day Delivery

Cart
DUCO

DucoBox Reno: Compact MEV for Retrofit and Awaab's Law

Most ventilation guidance assumes you are starting with an empty shell. The DucoBox Reno exists for the other situation: an occupied house, a finished ceiling, and a damp problem that needs solving now.

What the Reno is

A central mechanical extract ventilation (MEV) unit rated at 325 m³/h (90 l/s) at 150 Pa, with four Ø125 mm extract spigots. It measures 381 x 366 x 204 mm and weighs 3.1 kg.

The figure that decides most retrofits is the 204 mm depth. That is shallow enough for an airing cupboard, a boxed-in ceiling or a loft space without rebuilding anything, and light enough for one person to lift into position.

Why MEV rather than MVHR

A heat recovery unit needs two duct runs to outside and twice the internal pipework. In a renovation that is often the difference between a project that happens and one that does not. MEV extracts from the wet rooms and lets replacement air in through trickle vents and background leakage. You give up heat recovery and gain an installation that fits.

Awaab's Law and continuous extraction

Intermittent fans only work when someone remembers to switch them on. Continuous, sensor-driven extraction does not depend on behaviour, which is the point when a landlord has to show that damp and mould risk is being managed rather than hoped away.

Add a CO2 box sensor for the DucoBox Reno and the unit reads the house itself, ramping up when it is occupied and dropping back when it is not. A wireless user controller still gives the occupant a manual boost when they want one.

The all-in-one kit

For straightforward jobs the DucoBox Reno All-in-One Kit ships the unit, a battery RF user controller and three DucoVent Basic air valves in one box. For a kitchen, bathroom and WC that is the whole extract side, with nothing to specify line by line.

Getting the ductwork right

The unit only delivers its rated airflow if the ducting does not fight it. Keep runs short, use swept bends rather than tight elbows, and build the system from semi-rigid radial ducting rather than squashed flexible hose. Our guide to choosing a DucoFlex duct size covers the sizing.

Where the unit sits close to a bedroom, a duct silencer on the run is usually cheaper than moving the unit, and our silencer comparison explains which type suits which run.

Specifying one

Tell us the number of wet rooms, where the unit can physically go and whether the external terminal is roof or wall, and we will put the schedule together. Browse the full MEV range or get in touch on 01283 380031 | sales@pureclima.co.uk.

Previous Post Next Post

Leave A Comment